Materials needed:
1/2 yard of two gorgeous, fun, Summer fabrics
1/4 yard binding fabric
Aurifil thread for stitching and machine quilting
15 1/2" x 45" (WOF) piece of batting
Spray baste product
Finished size of runner will be 15 x 42 inches. (WOF = width of fabric)
•One half yard x WOF fabric pieces• The two half yard pieces of fabric each need to be cut to size
15 1/2" x WOF. (If the original half yard of fabric was cut correctly from your favorite quilt shop, this should leave you a 2 1/2" strip cut from the fabric. This strip can now go into your stash, as it will not be used in this project). Sandwich/layer together the bottom fabric right side down, batting in the middle, then top side fabric right side up. Following the directions of the spray baste product, spray baste lightly all layers together. Using a walking foot, machine quilt on the diagonal every 2 1/2", making a cross-hatch design. The quilting lines can be marked before quilting using a removable pen, or with quilters (painters) tape. I like to use the painters tape.
If using tape, just quilt right along beside the tape and then remove the tape. Move the tape to the next row of quilting and repeat. When the quilting is complete, trim the project to size,
15" x 42". Cut the binding fabric into four 2" strips. Join the strips with diagonal seams to make a continuous binding strip. With the wrong sides of the binding fabric strip inside, fold the strip in half lengthwise and press with your iron. Machine stitch binding to your "favorite" top side of the table runner fabric, then finish the binding by hand stitching to the back side of the runner. This project can easily be completed by a "confident beginner" during a Summer afternoon.
Fabrics used are designed by BariJ. for Art Gallery Fabrics.
If using tape, just quilt right along beside the tape and then remove the tape. Move the tape to the next row of quilting and repeat. When the quilting is complete, trim the project to size,
15" x 42". Cut the binding fabric into four 2" strips. Join the strips with diagonal seams to make a continuous binding strip. With the wrong sides of the binding fabric strip inside, fold the strip in half lengthwise and press with your iron. Machine stitch binding to your "favorite" top side of the table runner fabric, then finish the binding by hand stitching to the back side of the runner. This project can easily be completed by a "confident beginner" during a Summer afternoon.
Fabrics used are designed by BariJ. for Art Gallery Fabrics.
